Instalasi Modem Smartfren ZTE AC682 di Ubuntu 10.10

1. Hidupkan komputer, masuk ke desktop ubuntu, dan masukan modemnya ke colokan usb, buka terminal

ZoomUltra@Citycell:~$ lsusb

Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 003: ID 19d2:ffde ONDA Communication S.p.A.

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Dari hasil tsb di dapatkan vendor id (19d2) dan product id (ffde). Kode ffde berarti modem terdeteksi sebagai storoge device atau CD-ROM.

2] Sekarang kita eject drive CD-ROM tsb

ZoomUltra@Citycell:~$ sudo eject /dev/sr1


Catatan: USB mode switch tidak diperlukan utk modem ini. sr1 di liat dari hasil dmesg

3] Ketik lsusb untuk mengetahui perubahan produk id dari ffde ke ffdd.

ZoomUltra@Citycell:~$ lsusb

Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 002 Device 004: ID 19d2:ffdd ONDA Communication S.p.A.

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Catatan: jika tidak terjadi perubahan produk, cabut kemudian colokin lagi modemnya.

4] Masukan parameter ke kernel

ZoomUltra@Citycell:~$ sudo modprobe usbserial vendor=0x19d2 product=0xffdd

5] Ketik wvdialconf untuk membuat file /etc/wvdial.conf.

ZoomUltra@Citycell:~$ sudo wvdialconf

Editing `/etc/wvdial.conf’.

Scanning your serial ports for a modem.

……………………….

………………………..

ttyUSB0<*1>: ATQ0 V1 E1 — OK

ttyUSB0<*1>: ATQ0 V1 E1 Z — OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 — OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 — OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK

ttyUSB0<*1>: Modem Identifier: ATI — Manufacturer: QUALCOMM INCORPORATED

ttyUSB0<*1>: Speed 9600: AT — OK

ttyUSB0<*1>: Max speed is 9600; that should be safe.

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK

………………………….Found a modem on /dev/ttyUSB0.

Modem configuration written to /etc/wvdial.conf.

ttyUSB0: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

6] Edit file /etc/wvdial.conf f

ZoomUltra@Citycell:~$ sudo gedit /etc/wvdial.conf

[Dialer smart]

Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Modem Type = Analog Modem

Phone = #777

ISDN = 0

Username = smart

Init1 = ATZ

Password = smart

Modem = /dev/ttyUSB0

Baud = 460800

Command Line = ATDT

Stupid Mode = 1

[Dialer mobi]

Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Modem Type = Analog Modem

Phone = #777

ISDN = 0

Username = m8

Init1 = ATZ

Password = m8

Modem = /dev/ttyUSB0

Baud = 460800

Command Line = ATDT

Stupid Mode = 1

7]. Jalankan wvdial smart (jika pake operator smart) wvdial mobi (jika pake mobi

ZoomUltra@Citycell:~$ sudo wvdial smart

–> WvDial: Internet dialer version 1.60

–> Cannot get information for serial port.

–> Initializing modem.

–> Sending: ATZ

OK

–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

–> Modem initialized.

–> Sending: ATDT#777

–> Waiting for carrier.

ATDT#777

CONNECT

–> Carrier detected. Waiting for prompt.

~[7f]}#@!}!} } }=}!}$}%\}”}&} } } } }#}%B#}%}%}&hk#>}’}”}(}” !~

–> PPP negotiation detected.

–> Starting pppd at Fri Dec 3 23:01:31 2010

–> Pid of pppd: 1647

–> Using interface ppp0

–> pppd: ���[08]���[08]

–> pppd: ���[08]���[08]

–> pppd: ���[08]���[08]

–> pppd: ���[08]���[08]

–> pppd: ���[08]���[08]

–> local IP address 10.1.63.194

–> pppd: ���[08]���[08]

–> remote IP address 2.2.2.2

–> pppd: ���[08]���[08]

–> primary DNS address 117.18.224.146

–> pppd: ���[08]���[08]

–> secondary DNS address 117.18.224.147

–> pppd: ���[08]���[08]

Jika mengetikan perintah ifconfig dari Terminal, seharusnya saat ini Anda sudah dapat melihat interface ppp0:
# ifconfig
ppp0      Link encap:Point-to-Point Protocol
inet addr:10.185.28.106  P-t-P:10.17.95.5  Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
RX packets:21022 errors:0 dropped:0 overruns:0 frame:0
TX packets:21868 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:22553767 (22.5 MB)  TX bytes:3244197 (3.2 MB)

- Lakukan test ping ke google.com atau situs lainnya untuk memastikan kalau koneksi telah berhasil dilakukan
# ping www.google.co.id
64 bytes from 74.125.235.19: icmp_seq=1 ttl=53 time=88.2 ms
64 bytes from 74.125.235.19: icmp_seq=2 ttl=53 time=90.3 ms
64 bytes from 74.125.235.19: icmp_seq=3 ttl=53 time=85.4 ms

Biar otomatis tidak usah melakukan langkah2 tsb berulang-ulang, lakukan langkah berikut:

Masuk terminal, ketik sudo gedit /etc/modules
paste baris berikut
usbserial vendor=0x19d2 product=0xffdd
simpan
modem di colokin sebelum komputer hidup

Sumber: http://citycellmodemtroubleshoot.blogspot.com/2011/02/installation-of-zte-ac682-modem-in.html